User manual

17
Ordercode: 40158
XS-1 RGBW
12. Manual control
With this menu you can set the manually set 8 options.
01) Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) Press the UP and DOWN buttons to toggle between:
Pan 000-255
Tilt 000-255
Red 000-255
Green 000-255
Blue 000-255
White 000-255
Dimmer 000-255
Strobe 000-255
04) Press the SETUP button to confirm your choice.
13. Test
With this menu you can test your XS-1.
01) Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) The XS-1 will now run the automatic test of all the available features.
14. Lifetime
With this menu you can view how long your XS-1 has been used.
01) Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) The XS-1 will now show its operating time.
15. Firmware Version
With this menu you can view which version your XS-1 has.
01) Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) The XS-1 will now show its currently installed software version .
16. Reset
With this menu you can reset your XS-1 has.
01) Press the MENU button and then the Up / Down buttons, until the display shows .
02) Press the ENTER button to open this menu.
03) Use the UP/DOWN buttons to change the setting from No to Yes .
04) If the device has been set to No, the device will not reset.
05) If the device has been set to Yes, the device will reset.
06) Press the SETUP button to confirm your choice.