Product guide

8
Troubleshooting
No Light, No Movement - All Products
This troubleshooting guide is meant to help solve simple problems. If a problem occurs, carry out the steps
below in sequence until a solution is found. Once the unit operates properly, do not carry out following
steps.
If the light effect does not operate properly, refer servicing to a technician.
Response: Suspect three potential problem areas: the power supply, the lamp, the fuse.
1. Power supply. Check that the unit is plugged into an appropriate power supply.
2. The lamp. Replace the old lamp with a new one with the same specifications. See page 5 for
replacing the lamp.
3. The fuse. Replace the fuse. See page 7 for replacing the fuse.
Product Specification
Model: Showtec Orion Chase Set
Power: 240V-50Hz (CE)
Sound-controlled via built-in microphone
Dimensions: 280 x 240 x 125mm (LxWxH)
Weight: 4 x 5,44 kg
Lamps
Allowed lamp models*:
Philips EFP GZ6.35 12V 100W (50 hr, 750 Lumen) ordercode 80810
EFP GZ6.35 12V 100W (150 hr) ordercode 82399
EFP GZ6.35 12V 100W (50 hr,) ordercode 82403
Minimum distance:
Minimum distance from flammable surfaces: 0.5m
Minimum distance to lighted object: 0.8m
*: Versions for other lamps may be produced. Please check the specification label on your product.
Design and product specifications are subject to change without prior notice.
Website: www.Showtec.info
Email: [e-mail]