User`s manual

Installation & User’s Manual SL STRIP 400 RGBW LED Luminaires

INSTALLATION AND SET UP

Sh wline

3. Connecting to the DMX512 Network

Basic DMX512 installation consists of connecting multiple SL STRIP 400 RGBW LED Luminaires together (up

to 32 the control console (or DMX512 control source) to luminaires) in "daisy-chain" fashion. A cable runs from

the DMX Another cable runs from the other DMX connector on the first SL STRIP 400 RGBW LED Luminaire.

connector on the first unit to a DMX connector on the next SL STRIP 400 RGBW LED Luminaire (or DMX512

Figure 4: SL STRIP 400 RGBW LED Luminaire DMX512 Input / Output Connections

Note: For more information on DMX512 networking and systems, refer to "Additional Resources for DMX512" on

page 1. For SL STRIP 400 RGBW LED Luminaire DMX Mapping, refer to "DMX CONTROL" on page 17.

Figure 5: SL STRIP 400 RGBW LED Luminaire - DMX512 Connections

Bottom of Unit

DMX512 / RDM Input

DMX512 / RDM Output

DMX512

(out from first

to second luminaire)

DMX512 (out to the next

luminaire or DMX512

controlled device)

SL STRIP 400 RGBW LED Luminaires

DMX512 Connections

Note: Remaining pins on each connector are not used.

DMX512 Signal XLR Pin

Common (Drain) 1

DMX512 - 2

DMX512 + 3

(from console or

control device)

device to be controlled).