User`s manual

SL NITRO 510 LED STROBE Luminaire RDM Parameter IDs 33
SL NITRO 510 LED STROBE Luminaire
Installation & User’s Manual
Sh wline
■
SELF_TEST_DESCRIPTION 0x1021
■
CAPTURE_PRESET 0x1030
■■
PRESET_PLAYBACK 0x1031
Table 18: SL NITRO 510 LED STROBE Luminaire RDM Parameters IDs
Get
Allowed
Set
Allowed
RDM Parameter IDs Value Comment Implemented
Table 19: SL NITRO 510 LED STROBE Luminaire RDM Manufacturer Status IDs
Manufacturer Specific messages are in the range of 0x8000 - 0xFFDF. Each Manufacturer-specific Status ID shall have a
unique meaning, which shall be consistent across all products having a given Manufacturer ID. See Table B-2, ANSI E1.20-
2010.
Status ID Message Value Data Value 1 Data Value 2 Status ID Description
8100H 00H 00H ALL OK
Table 20: SL NITRO 510 LED STROBE Luminaire RDM Manufacturer Specific PIDs for Root Device
Get
Allowed
Set
Allowed
RDM
Parameter IDs
Type Length Unit Prefix Min Max Default Description
Category - Manufacturer Defined PIDs - Range is 0x8000-0xffdf (See ANSI E1.20-2010 Standard, Table A-3)
■■
8A00H U8 1 None None 0 100 100 Dimmer
■■
8AB2H U8 1 None None 1 18 1 Chase
■■
8AB1H U8 1 None None 0 31 0 Preset
■■
8A92H U8 1 None None 0 255 0 Strobe
■■
8A94H U8 1 None None 0 255 0 Duration
■■
8A40H U8 1 None None 0 1 0 Link Mode
■■
8AA1H U8 1 None None 0 3 0 Dimming Curve
■■
8A0CH U8 1 None None 0 3 0 DMX Fail Mode
■■
8AA0H U8 1 None None 0 4 0 Backlight Off Time
■■
8AA2H U8 1 None None 0 94 0 Power Up Setup
■■
8A41H U8 1 None None 0 1 0 Lock Fixture
■■
8A97H U8 1 None None 0 1 0 Fan Auto / Off Setup
■■
8A98H U8 1 None None 0 255 0 Effect