User`s manual

Installation & User’s Manual SL NITRO 510 LED STROBE Luminaire
24 DMX CONTROL
Sh wline
DMX CONTROL
This section contains information for operating the luminaire using one of the DMX control modes as set by the
luminaire’s menu system:
• "Single Channel Control Mode" (below)
• "Three Channel Control Mode" (below)
• "Four Channel Control Mode" on page 25
• "16-bit Control Mode" on page 25
• "Zone Mapping Mode" on page 26
For Menu options and detailed information, see "LCD Display and Menu System" on page 16.
Note: These tables assume a DMX start address of 1. When a different starting address is used, this address becomes
channel 1 function and other functions follow in sequence.
1. Single Channel Control Mode
Table 11 provides DMX channel mapping of the DMX512 control values when the SL NITRO 510 LED STROBE
Luminaire is in Single Channel DMX512 mode (as set by the luminaire’s menu system).
2. Three Channel Control Mode
Table 12 provides DMX channel mapping of all DMX512 control values when the SL NITRO 510 LED STROBE
Luminaire is in Three Channel DMX512 mode (as set by the luminaire’s menu system).
Table 11: DMX Channel Mapping (Single Channel Mode)
DMX
Channel
Parameter Range DMX Range%
Default - recom-
mended console
default values
Description
1 Strobe Rate 0 - 255 0 - 100% 0
Controls strobe rate operation. Refer to
"Strobe Rate DMX Timing Detail" on
page 29
.
Table 12: DMX Channel Mapping (Three Channel Mode)
DMX
Channel
Parameter Range DMX Range%
Default - recom-
mended console
default values
Description
1 Intensity 0 - 255 0 - 100% 0
8-bit control for the intensity of the LED settings -
0 to 255 (full)
2 Strobe Duration 0 - 255 0 - 100% 0
Controls strobe duration operation. Refer to
"Strobe Duration DMX Timing
Detail" on page 30
3 Strobe Rate 0 - 255 0 - 100% 0
Controls strobe rate operation. Refer to
"Strobe Rate DMX Timing Detail" on
page 29
.