User`s manual

Installation & User’s Manual SL NITRO 510 LED STROBE Luminaire
16 OPERATION AND PROGRAMMING
Sh wline
OPERATION AND PROGRAMMING
1. LCD Display and Menu System
The SL NITRO 510 LED STROBE Luminaire’s LCD Display and Menu System provides local control for accessing
the following fixture’s settings:
• Presets (Standard and User Defined)
• Effects (Chases - preloaded and user defined)
• Strobe / Timing
• Fixture Settings
• Fixture Lockout (to prevent changes)
• Password Setting
• Current Fixture Operational Status
• Setting the DMX512 Address
Note: If there are multiple luminaires in a system, changes would need to be made at each LCD Menu as desired. For
SL NITRO 510 LED STROBE Luminaire menu structure, see "SL NITRO 510 LED STROBE Luminaire Main
Menu Options" on page 17.
Upon power up, the LCD will display the main screen showing the product type/name. If DMX is enabled, the
programmed address will appear after power up.
2. LCD Display and Menu System Operation
The LCD Display Menu system consists of several categories. Use the Menu Buttons to access and make changes to
the menu items. When the desired menu item is reached, press the desired Menu Button to display the menu options
and to navigate and configure the menu options as required.
To navigate and access menu settings/selections:
Step 1. Make sure unit is powered and turned on.
Step 2. Press the desired button (as shown in Figure 13 on page 17) to access menu categories.
Step 3. Use UP | DOWN | LEFT | RIGHT arrow buttons to navigate through the various options and settings.
Step 4. Make changes as desired.
Step 5. Press CHECK MARK (OK) button to accept changes.