User`s manual

Installation & User’s Manual SL NITRO 510 LED STROBE Luminaire

12 INSTALLATION AND SET UP

Sh wline

Connecting Luminaires Side-to-Side

Each SL NITRO 510 LED STROBE Luminaire ships with three Luminaire Connecting Pins as indicated in Figure 9.

All three pins are used to connect two luminaires together linearly. Each fixture must be mounted using its own

mounting hardware. The side-to-side pins are only to align the luminaires and do not provide hanging support.

Figure 9: Connecting Luminaires Side-to-Side

WARNING! Each fixture must use an approved safety cable attached to a fixed object.

6. Mounting SL NITRO 510 LED STROBE Luminaire with Other

Luminaires

The SL NITRO 510 LED STROBE Luminaire and SL BAR 520 LED Luminaire are designed to be connected

together top-to-bottom and/or end-to-end using the same connecting hardware. The pixels of the SL BAR 520 LED

Luminaire and the zones of the SL NITRO 510 LED STROBE Luminaire will be perfectly aligned when connected

via the built-in connecting hardware.

Figure 10: Combining SL NITRO 510 and SL BAR 520 luminaires

Front Pin (x1)

Back Pin (x2)

SL NITRO 510 LED

SL BAR 520 LED Luminaire

STROBE Luminaire (x2)

Note, all luminaires are sold separately.