Safety Instructions

7. Waves
8. Fireworks
9. Rainbow
10. Color Band
11. Up and Down
12. Snow
13. Glow
14. Carnival
15. Alternate
These functions can be changed by using control box or foot
pedal switch.
Please see Instructions of control box as below.
Operation
Turning on the tree
Step 1. Connect each tree section well and plug the well-connected power
cord into a wall outlet.
Instruction of control box and Wifi
Connection
Instruction of control box
1. Press the Function/Reset button on control box:
Short press: switch 15 functions.
Long press at least for 5s: switchover to wifi mode.
2. Press the Color/Timer button on control box:
Short press: switchover to 29 colors and theme.
Long press at least for 2s: set timer.
Instruction of Wifi connection
There are two ways for Wifi connection:
1. STA: Wifi signal indicator light stays on fast flash.
2. AP: Wifi signal indicator keeps flickering slowly.
This two modes can be switchover by long pressing the “Function/Reset”
button at least for 5s. The current instruction should be in AP mode. (wifi
signal indicator light should be in off state)
The wifi signal indicator on the control box flashes continuously for 3
minutes after the power is on.
You can connect wifi when wifi signal indicator is flashing.
1. Download APP
a. Search “Holiday Tree” to download the APP.
b. Scan QR Code to download.
2. Open Wifi settings of your mobile device.
3. Find and select “ShowTree_xxxx” network.
4. Ensure that “ShowTree_xxxx” network is connected.