Specifications

Hardware Installation Chapter 1:
8
1.2.2.2 Front Panel Overview
Call out Description
A
Erase –
• If pressed twice in quick succession,
the CLI password will be changed to
its original password.
• If pressed three times in quick
succession, the 5300 will revert to
factory default settings. All passwords
will be reset and all prior
configurations will be erased.
Note: The default LAN address will be
set to 192.168.1.1
Caution: Setting the system
configuration to factory default will
erase all configuration changes.
B
Power LED
• Off – Power switch is off (or no power from the AC
outlet)
• Solid Green – Power is supplied to the unit
C
Disk Activity LED
• Off – No disk activity
• Flashing Red – Data is being read or written to the
disk.
• Solid Red – System failure.
D
Port 3 (Management Port) – Out of band management
port used for configuration purposes. DHCP client is
enabled on this port from the factory.
E
Port 2 (WAN Port) – Connects to the WAN or upstream
router. DHCP enabled from the factory.
F
Port 1 (LAN Port) – Connects to the local network or
LAN. Factory configured for static IP with 192.168.1.1 IP
address.
Figure 1-3 Front view of the 5300