Installation guide

ShoreTel-T1 and ShoreTel E1 Voice Switches ShoreTel Voice Switches
F
ShoreTel 14.2 Planning and Installation Guide 483
ShoreTel-T1 and ShoreTel E1 Voice Switches
The following sections describe ShoreTel-T1 and ShoreTel E1 resource capacity, LED behavior, and
connectors. The ShoreTel-T1 is not supported in installations outside the U.S. and Canada. Figure 96
displays the ShoreTel-T1 front plate. The ShoreTel E1 front plate is identical to the ShoreTel-T1
except for the E1 labeling.
Figure 96: ShoreTel-T1 Front Plate
The ShoreTel-T1 provides higher-density trunking to the central office using CAS or PRI signaling.
The ShoreTel-T1 can also be used as a gateway to legacy PBX systems.
7 Extension 11 Blue/Black 36 Black/Blue
8 Extension 12 Orange/Black 37 Black/Orange
– 13 Green/Black 38 Black/Green
– 14 Brown/Black 39 Black/Brown
– 15 Slate/Black 40 Black/Slate
– 16 Blue/Yellow 41 Yellow/Blue
– 17 Orange/Yellow 42 Yellow/Orange
– 18 Green/Yellow 43 Yellow/Green
– 19 Brown/Yellow 44 Yellow/Brown
– 20 Slate/Yellow 45 Yellow/Slate
– 21 Blue/Violet 46 Violet/Blue
– 22 Orange/Violet 47 Violet/Orange
– 23 Green/Violet 48 Violet/Green
– 24 Brown/Violet 49 Violet/Brown
– 25 Slate/Violet 50 Violet/Slate
Table 96: ShoreTel 40 RJ-21X Telephone and Trunk Connector Pins(Continued)
Port Type
Ring Tip
Pin # Cable Color Pin # Cable Color
ShoreGear- T1
Default
Switch
Power
LED
RS-232C
Maintentance
Port
Network
LEDs
LAN
Connectors
T1 Monitor Port
(RJ-48C)
T1 Port
(RJ-48C)