Installation guide

ShoreTel 50 Voice Switch ShoreTel Voice Switches
F
ShoreTel 14.2 Planning and Installation Guide 425
ShoreTel 50 Voice Switch
The following sections describe ShoreTel 50 resource capacity, LED behavior, and connectors. The
ShoreTel 50 is not supported in installations outside the U.S. and Canada. Figure 81 displays the
ShoreTel 50 front plate.
Figure 81: ShoreTel 50 Front Plate
Switch Capacity
 Analog Circuit Resources

Ports 1-4: Four Loop Start Trunks

Ports 11-12: Two Extensions or DID Trunks. A single command configures all ports as either
Extensions or DID trunks.

Power Failure Transfer Unit: Trunk Port 1 to Extension Port 12
 Make Me Conference Resources: six ports

Ports 1-4, 11-12
 Maximum IP Phone Resources: 50 devices

Analog Port Reallocation: 30

Built-in Resources: 20
LED Descriptions
Power LED
The ShoreTel 50 has one power LED, which indicates the following:
 On: The switch is operating normally.
 Off: The switch has no power.
Default
Switch
Audio Output Port
(night bell)
Power
LED
Network
LEDs
LAN 2
Connector
RS-232C
Maintentance
Port
RJ-21X
Telco Port
Status
LED
Audio Input Port
(music on hold)
Network
LEDs
LAN 1
Connector