Installation guide

380 Planning and Installation Guide ShoreTel 14.2
Regulatory and Safety Information Canada
B
Canada
This Class A digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe
A est conforme à la norme NMB-003 du Canada.
Restricted Access Location
This product is intended to be installed only in a RESTRICTED ACCESS LOCATION. A RESTRICTED
ACCESS LOCATION is defined as an area where access can be gained only by SERVICE
PERSONNEL who have been instructed about the reasons for the restrictions applied to the location
and about any precautions that must be taken. RESTRICTED ACCESS LOCATIONS can be accessed
only through the use of a tool or lock and key or other means of security, and are controlled by the
authority responsible for the location. SERVICE PERSONNEL are defined as persons having
appropriate technical training and experience necessary to be aware of hazards to which they are
exposed in performing a task and of measures to minimize the danger to themselves or other persons.
WEEE Information
In accordance with the requirements of council directive 2002/96/EC on Waste of Electrical and
Electronic Equipment (WEEE), ensure that at end-of-life you separate this product from other waste
and scrap and deliver to the WEEE collection system in your country for recycling.
Safety
The following information is included in this publication for the use and safety of installation and
maintenance personnel.
Important Safety Instructions
 Read all of the instructions before attempting to operate the equipment and before connecting the
power supply.
 Always follow basic safety precautions to reduce the risk of fire, electrical shock, and injury to
persons.
 To prevent fire or shock hazard, do not expose the unit to rain, moisture, or install this product near
water. Never spill liquid of any kind on this product.
WARNING!
This equipment uses a three-conductor power cord with safety grounding conductor. Ensure that this
is connected to an AC outlet with provision for grounding. Ensure the permanent earthing protector is
connected as directed in the installation instructions. Consult a licensed electrician if necessary.