Installation guide
Running the Import Public Contacts Windows Batch File ShoreTel Integration with External Applications
17
ShoreTel 14.2 Planning and Installation Guide 313
Running the Import Public Contacts Windows Batch File
To run the Import Public Contacts Windows batch file, follow these steps:
1. Open a Command Prompt window (on your Headquarters server).
2. CD to the location of the Import Public Contacts Windows Batch File:
On 32-bit systems:
C:\Program Files\Shoreline Communications\Shoreware Server\ImportContacts\
On 64-bit systems:
C:\Program Files (x86)\Shoreline Communications\Shoreware Server\ImportContacts\
The location of the file is shown in Figure 54.
Password Your Exchange password.
Required only if you are not using Network Credentials.
Domain Name of your Exchange domain.
Required only if you are not using Network Credentials.
EWSUrl Exchange Web Service location.
For example, https://10.XX.XXX.XX/EWS/exchange.asmx.
PF Path to your company’s Public Folder.
Location where your company’s public contacts are stored. (“Testfolder” and
Testcontact” are placeholders in the example.)
OptionalColumns Specifies information that is not imported and uploaded.
For example, the home address or height of a contact.
LogFile Specifies the log file name.
The default location is C:\Program Files (x86)\Shoreline
Communications\ShoreWare Server\ImportContacts for 64 bit systems.
CSVFile Specifies the CSV file name that is generated.
The default location is C:\Program Files (x86)\Shoreline
Communications\ShoreWare Server\ImportContacts for 64 bit systems.
Note
To perform this procedure, you must have system administrator permissions.
Table 69: Import Contacts Configuration File Parameters (Continued)