Installation guide

212 Planning and Installation Guide ShoreTel 14.2
ShoreTel Server Installation Installing the Headquarters Server Software
11
5. When the installation completes, you are prompted to restart your server. Click Finish to restart.
After the server restarts, you may be prompted to configure a TAPI service provider. Enter the
appropriate area code and access code and continue.
6. If upgrading, restart the ShoreTel Voice Switches to finish the upgrade.
This process upgrades the firmware on the switches but also affects all calls in progress.
Figure 41: Media Port Usage Change
7. Register the software (this is mandatory). See Registering the Headquarters Server Software on
page 213.
8. Install your license keys. See Installing License Keys on page 216.
Note
The data files are unique to your system and include your system configuration, voice messages,
and automated attendant prompts. These files will be stored in a ShoreTel data folder and should
be included as part of your back-up plan for the server.
Note
The current software release does not support port 5004. If you are upgrading from an older
release with port 5004 enabled, the installer will display the warning shown in Figure 41.