Installation guide

192 Planning and Installation Guide ShoreTel 14.2
Server Requirements Microsoft Windows Server 2008 Configuration
10
1. On the Windows desktop, click Start > Programs > Administrative Tools > Server Manager.
The Service Manager page appears.
2. Click Features. The Features panel appears on the right.
3. Click the Add Features icon. The Add Features Wizard appears.
4. Select Features in the menu. The Select Features Installation page appears.
5. Check the SMTP Server check box.
6. Click Next. The Confirm Installation Selections page appears.
7. Click Install.
Setting SMTP and FTP Properties
After SMTP and FTP are installed, the startup type must be changed from manual to automatic. The
following procedure changes the startup type for SMTP and FTP.
1. Access the Services table by selecting Server Manager > Configuration > Services.
2. Right click Simple Mail Transfer Protocol and select Properties on the menu. The Simple Mail
Transfer Protocol (SMTP) Properties page appears as shown in Figure 32.
Figure 32: Simple Mail Transfer Protocol Properties Page
3. Select Automatic on the Startup Type drop down menu, then click the OK button.
4. Return to the Services page.
Note
Verify that the FTProot folder in the Inetpubs directory has at least read access.