Specifications
ShoreWare Call Manager Manual Chapter 4: Voice Calls
38
• Click the Application Button and select Dial -> Make Call.
• Right click the ShoreTel icon in the System Tray and select Dial -> Make Call
• Press Ctrl+Alt+D
Call Manager displays the Make New Call dialog box, as shown in Figure 4-2.
Step 2 Begin entering the call recipient’s name or number in the data entry field at the top
of the panel.
The table lists entries from your directory, filtered by data entry field contents.
Step 3 Select the desired recipient in the table.
The Dial Digits field, located above the buttons at the bottom of the panel, lists the
number to be dialed after you select a table entry.
Step 4 Press the Make Call button at the bottom of the panel.
To initiate a call from a specific Call Manager Viewer, refer to the manual section that
describes that viewer.
4.5 Managing Incoming Calls
4.5.1 Inbound Call Signals
Call Manager provides three methods of signaling the receipt of an inbound voice call:
• Display a Call Alert in the bottom right corner of your monitor
You control the display of Call Alerts from the Options and Preferences: Telephony
panel, as described in Section A.2.1 on page 151. Call Alerts are described in Section
3.1.1.3 on page 20.
• Play an audible tone through your computer.
You can select the tone that your computer plays from the Options and Preferences:
Sounds panel, as described in Section A.2.17 on page 173.
• Display a call cell in the Active Call Area of the Main Window.
Figure 4-2 Make New Call panel