Specifications

ShoreWare Call Manager Manual Appendix A: Options and Preferences Window
172
• Audio Device: This option specifies the device through which the user accesses
SoftPhone.
• Network adapter: This option specifies the Network Interface Card through which the
SoftPhone performs audio calls.
• Endpoint Name: This data field identifies the string through which ShoreWare controls
the SoftPhone as an MGCP device.
A.2.16 Video
The Video panel configures Video Call settings. Section 4.7.3.5 on page 65 describes the
Options and Preferences: Video panel.
To access the Video panel, shown in Figure A-19, open the Options and Preferences
window and select Video in the menu on the left side of the window.
The following parameters are configured from the Video Options and Preferences panel:
• Automatically request video when calling: Users select this option to request a video
call when initiating voice calls with users authorized for video calls.
• Accept video requests from others: This option programs a user’s automatic response
to video call requests.
— Always: Select this option to enable video when the initiator requests video.
— Never: Select this option to reject all initiator requests to use video. You can
activate video later in the call even when this option is selected.
— Ask me: Select this option to receive a video inclusion prompt when an initiator
requests video.
• Video camera: This parameter specifies the video device that Call Manager uses to
perform the video call.
• Configure Camera: Pressing this button accesses a panel that configures brightness,
contrast, and saturation settings for the video device.
Figure A-19 Options and Preferences: Video panel