Specifications

Appendix A: Options and Preferences Window ShoreWare Call Manager Manual
ShoreTel 9 153
• Show extension calling actions: Selecting this option configures QuickDialer to
display available methods of contacting filtered extensions.
• Show Go arrow: Selecting this option displays a Go arrow on the right side of the
QuickDialer field. Pressing the Go arrow initiates a call to the contact that QuickDialer
displays.
• Calls to show in redial: The Redial icon, located on the right side of the QuickDialer
field, displays calls recently made and received, as specified by this parameter setting.
— Outbound Calls: Select this option to display only previously called numbers.
— Missed Calls and outbound calls: Select this option to display only numbers of
missed inbound calls and previously made outbound calls.
— All calls: Select this option to display numbers of all of your inbound and outbound
calls.
A.2.3 Call Handling Mode
The active Call Handling Mode determines the settings that Call Manager uses to handle
your inbound calls. The Call Handling Mode panel, shown in Figure A-3, specifies the
active Call Handling Mode. Refer to Section 4.5.4.2 on page 41 for more information about
the active Call Handling Mode.
To access the Call Handling Mode panel, open the Options and Preferences window and
select Call Handling Mode in the menu on the left side of the window.
Call Handling Mode panel parameters include:
• Current call handling mode determines the active method of handling inbound calls.
One mode is always current.
• When Call Manager is started options enable call handling mode warnings:
Figure A-3 Options and Preferences: Call Handling Mode panel