Specifications

Configuring Switches
6 – 18 ShoreTel, Inc.
ShoreGear-Teleworker (IPBX-TW) Voice Switch
The ShoreGear-Teleworker (IPBX-TW) (Figure 6-8) provides four universal analog
ports for remote teleworkers.
NOTE The ShoreGear-Teleworker is supported only in the U.S. and Canada.
The ShoreGear-Teleworker LEDs are defined below. For information about the
connectors, please see the ShoreTel 6 Planning and Installation Guide.
Figure 6-8 ShoreGear-Teleworker LEDs
Power LED
The ShoreGear-Teleworker (IPBX-TW) has one green power LED, which indicates the
following:
Traffic This LED indicates total network activity, as follows:
• When flashing, network activity is detected.
• When on (not flashing), heavy network activity is detected.
• When off, no network activity is detected.
NOTE If you have three switches that are connected to the same hub, and
one switch’s Traffic LED shows activity, the other switches will
indicate the same.
Network LEDs
Power LED
Switch port
LEDs
On The switch is operating normally.
Off The switch has no power.
Flashing 2 flashes—The switch failed its internal self-test. This indicates a
hardware failure; replace the unit and submit a Return Material
Authorization (RMA) to ShoreTel, Inc.
3 flashes—Booting via FTP. Flash memory may be corrupted. Go to
the Quick Look page to make sure that the system is running
properly.