Specifications

Configuring Application Servers
4 – 4 ShoreTel, Inc.
For more information about integration to legacy voice mail systems, see the ShoreTel
6.1 Planning and Installation Guide.
Adding Application Servers
The Application Servers link in the ShoreWare Director navigation frame gives you
access to the Application Servers list page as shown in Figure 4-1.
Figure 4-1 Application Servers List Page
The Application Servers list page is presented in alphabetical order.
NOTE The ShoreTel system, by default, is configured with one server at the
“Headquarters” site. Additional sites must have been configured prior to this
step to be available. Refer to Chapter 3 “ShoreTel Sites” for more information
about adding remote sites.
To add a new server:
Step 1 Select the server site from the Add new application server at site drop-
down list.
Step 2 Click Go. The Application Servers edit page appears as shown in
Figure 4-2.
Step 3 Enter parameters for the new server as described below.
Step 4 Click Save.
To edit a server:
Step 1 Select a server from the list in the Name column.
Step 2 Click one of the servers from the list. The Application Servers edit
page appears as shown in Figure 4-2.
Step 3 Change parameters as needed for the new server.
Step 4 Click Save.