Specifications

Configuring Users
10 – 14 ShoreTel, Inc.
User Groups
Configuring user groups is the second step in configuring users. The User Groups
page, shown in Figure 10-7, lets you create user groups and edit existing user group
configurations. To access the User Groups list page, click User Groups from the
navigation frame.
Figure 10-7 User Groups List Page
NOTE
If you have not created classes of service for your user groups, refer to “Classes
of Service” on page 10-2 and configure them.
User Group List Page Column Definitions
The columns in the User Groups table are as follows:
Allow Message Notification This enables message notification. It might be further
qualified by Allow Message Notification to External
Number.
This is enabled as a system default.
Allow Message Notification to
External Number
This permits message notification to an external
number. It cannot be set unless Allow Message
Notification is enabled.
This is enabled as a system default.
Name This is the name of the user group.
Telephony Features This is the telephony features permissions CoS associated with
the user group.
Call This is the call permissions CoS associated with the user group.
Voice Mail This is the voice mail CoS associated with the user group.
SMDI This is the Simplified Message Desk Interface mode set for the
user group. Also see “Legacy Voice Mail Integration” on
page 4-3.
Account Codes This is the account code collection mode set for the user
group. Also see “Account Codes” on page 9-3.