Specifications

Setting Call Control Options
9 – 6 ShoreTel, Inc.
Step 4 Click on the New button. A window appears (as shown below) that
will allow you to enter the name of a new account and the new account
code.
Figure 9-3 Account Code Info Dialog Box
Step 5
Enter a name for the account code in the Name field.
Step 6 Enter an account code in the Account Code field. Account codes can
be any length to a maximum of 15 digits. You can use prefixes to group
account codes. For example, the account codes 1234 and 12345 can
coexist. If your system will contain more than 50,000 account codes,
you can enter a string of wildcard characters (a question mark) in place
of the DTMF digits.
Note: Up to 15 wildcard characters can be entered in an account code,
but if all of the account codes in your organization have 6 digits, then
you should enter 6 wildcards in this field. A single account code cannot
contain a mix of digits and wildcard characters.
Step 7 Click Save to create the account. To create another account, click Next.
Step 8 Click Close to exit the Account Code Info dialog box.
Account codes are enabled on the basis of user groups. For more information, see “User
Groups” on page 10-14.
Hunt Groups
The Hunt Groups list page is shown in Figure 9-4. Clicking on a group name shows the
details for the hunt group, as shown in Figure 9-5 in the Hunt Groups edit page.
Figure 9-4 Hunt Groups List Page