Specifications

Configuring IP Phones
ShoreTel 6.1 Administration Guide 8 – 3
To edit the IP address range for a site:
Step 1 From the Site column on the IP Address Map List page, click the site
for which you are setting a range. The Site IP Address Range edit page
appears as shown in Figure 8-2.
Figure 8-2 Site IP Address Range Edit Page
Step 2
If you are setting the IP address range for a site other than the one
shown in the Site drop-down list, select it from the list.
Step 3 Enter the lowest IP address in the Low IP Address text-entry field.
Step 4 Enter the highest IP address in the High IP Address text-entry field.
Step 5 Enter the Caller ID number in the Caller’s Emergency Service
Identification (CESID) field that you would like to assign to the IP
phones within this address range. The CESID number will be sent to
the service provider whenever a 911 call is placed from one of these IP
phones. See Appendix B, "Emergency 911 Operations" for more
information.
Step 6 If you are setting a range for teleworking IP phones, click the
Teleworkers check box.
Step 7 To set the new range, click Save. You can set ranges for other sites in
the system by clicking Previous or Next.