Specifications

Configuring Switches
6 – 26 ShoreTel, Inc.
ShoreGear-120/24, 60/12, 40/8 Configuration
This section explains how to add new switches to your ShoreTel system and how to edit
existing switch configurations. From the Switches list page, click Go to add a new
voice switch, or click the name of an existing voice switch to change its configuration.
The ShoreGear-120/24 Switch edit page is shown in Figure 6-11.
Figure 6-11 ShoreGear-120/24 Edit Page
ShoreGear-120/24, -60/12, -40/8 Parameters
Parameters that appear on the ShoreGear-120/24, -60/12, and -40/8, Switch edit pages
are summarized together as follows:
Name This is the name of the voice switch.
Description This describes the switch. It is an optional entry that typically
tells where the switch is located or describes how it is used. For
example, the switch’s description might indicate the wiring closet
where the switch is located.
Site This describes the site where the switch is located. This is a read-
only parameter. If you want to move the switch to another site,
you must move all the associated users and trunks, delete the
switch from the current site, and add the switch to the new site.