User`s guide

Installing the ShoreTel Mobility Client Application

Provisioning Configuration Settings

1-6 ShoreTel Mobility User’s Guide Version 6.0

1.4 Provisioning Configuration Settings

IMPORTANT Before proceeding with the provisioning procedure, make sure that you

know your mobile phone number: This information is required. From the iPhone Home

screen, select Settings > Phone to see your phone number.

IMPORTANT Make sure that the device is connected to a Wi-Fi network prior to

proceeding. When the device is connected to a Wi-Fi network, the Wi-Fi icon on the Home

screen is lit and is white.

1 From the Home screen, select the ShoreTel Mobility Client.

2 Read and Accept the Emergency Call Warning page to continue.If you do not accept the

Emergency Call Warning, the ShoreTel Mobility Client exits without provisioning.

3 Read and Accept the Notification Warning page to continue. Refer to “Select a Notification

Type” on page 1-5 for details.

4 In the Mobility Router Address field, type the IP address or Fully Qualified Domain name

(FQDN) of the ShoreTel Mobility Router on the enterprise network. An example of an IP

address is 10.1.2.3, and an example of an FQDN is server1.example.com.

5 Enter your Username. The username is usually the username you use to log in to your

enterprise network. If your system administrator has created a local user account for you on

the Mobility Router, use that username.

6 In the User Password field, type the password for your user account. If you entered your

enterprise username, enter the password you use to log in to the enterprise network. If you

entered a local username, enter the password for that user account. Contact your system

administrator for the password for the local user account.

7 If you are connected to your enterprise local Wi-Fi network, select Next and continue to the

next step. Otherwise, slide Remote Provisioning to ON and select Next.

 When you are provisioning remotely, for example not connected directly to your

local enterprise Wi-Fi network, enter the public IP address and port number of the

Mobility Router and select Provision to continue.

8 You may provision up to 5 devices (per user), and is based on the number of devices

configured on the Mobility Router. Check with your Sys Admin if there is a conflict. The

Primary Device is the device that is used to determine your location. For example, this

device is typically the device you carry, hence determining if you are in the office, on the

road, available, away, etc. All of your devices may be used to make or receive calls, instant

messages, etc.

Select Add as a new device or if reprovisioning, Replace an existing device from the list of

earlier provisioned devices. If more than one of your devices is provisioned against this

Mobility Router, a list of your devices displays, with the Primary Device listed first during

provisioning.

If you want to make this device the Primary Device, select Ye s . The default is No. Select

Next to continue.