Specifications

Managing Remote Access Enable Remote Access for Users
6
ShoreTel Mobility Router Administration Guide 61
6. In the Presence/IM area, enable or disable Presence on the user devices in this group. By default,
Presence is disabled. Check the box to enable Presence. When this is checked, options pop up
that control whether Presence is available when the device is roaming:
 Cellular Data —Select to allow Presence to be shown in cellular packet-data networks.
 Cellular Data Roaming—Select to allow presence and IM activity to be performed on the
client while roaming.
7. Click Apply to save your changes.
Tip
The previous screen is an example configuration. Enable or disable the options as appropriate to the
User device.
Tip
Data Services for Cellular Data and Cellular Data Roaming are automatically enabled when
Presence/IM is enabled for these two networks. When either of these networks are disabled for
Presence/IM, they become active and can be configured in the Data Services area for configurations
other than Presence/IM.
Note
Remote Access certificate verification is performed by default. If the configuration does not match, a
warning is displayed.