Specifications

Managing Remote Access Call Admission Control
6
ShoreTel Mobility Router Administration Guide 56
2. In the Call Admission Control area, select Enable.
3. In the Restriction On field, choose Bandwidth, Calls, or Both.
1. Bandwidth - when the total bandwidth used by Secure Remote Voice calls reaches the
configured level in kbps, any new calls will be routed through the cellular network.
2. Calls - when the number of calls reaches the configured amount, all new calls are routed
through the cellular network.
3. Both - when the number of calls reaches the configured amount, all new calls are routed
through the cellular network.
4. In the Max Secure Remote Voice Bandwidth field, enter the maximum amount of bandwidth
allowed. The maximum is when the total bandwidth used by Secure Remote Voice calls reaches
the configured level in kbps. At this point, any new calls will be routed through the cellular network.
The number of calls actually allowed will depend on which voice codecs are in use, based on each
codec’s bandwidth.
Supported codecs in order of priority for PBX and Enterprise Client:
 G.711 μ-Law
 G.711 A-Law
 G.729 Annex-B
 AMR
 iLBC 30
Supported codecs in order of priority for Remote Wi-Fi and Cell Data Client:
 iLBC 30
 G.729 Annex-B