Specifications

Configuring Network Settings Configuring Ports
5
ShoreTel Mobility Router Administration Guide 37
Configuring Ports
Port ranges can be optionally configured. The ShoreTel Mobility Router uses default port ranges, but
these ranges may be modified.
Figure 21: Ports
1. Select Configuration > System > Networking > Ports.
2. Enter the Starting Port and/or Ending Port as appropriate.
3. Click Apply to save changes, or click Defaults to revert back to the original port ranges.
Note
The range for RAST TCP Flow and RAST UDP Flow can not overlap the Media Server RTP port
range. For example, if the Media Server RTP range is 25370 - 31999, the RAST Flow ranges can not
end higher than 25369 or start lower than 32000.