Specifications

Configuring Network Settings Configuring Routing Settings
5
ShoreTel Mobility Router Administration Guide 34
Configuring Routing Settings
Configure the default gateway or create additional static routes using the following procedures.
Figure 19: Routing
Configuring the Default Gateway
By default, the default gateway field is the IP address provided during the Initial Configuration Wizard
and should not be changed. The default gateway is the default route for the Mobility Router.
1. Select Configuration > System > Networking > Interface. The Interface page displays.
2. Refer to defining the Gateway in “Configuring Ethernet Interfaces” on page 32 for more
information.
Managing Static Routes
The default gateway is automatically set up as a static route. You can optionally create additional static
routes to send packets to specific IP addresses or a specific network.
Adding Static Routes
1. Select Configuration > System > Networking > Routing.
2. Click Add. The Add Route page displays.
3. In the IP Address field, type the IP address for the static route.
4. In the list of subnet mask values, select the value of the subnet mask for the IP address.
5. In the Gateway field, type the IP address of the gateway for the route.
6. In the Interface list, select the Ethernet interface for the route.
7. To save your changes, click Apply.