Specifications

Configuring System Settings Configuring Logging Settings

ShoreTel Mobility Router Administration Guide 20

3. To save your changes, click Apply.

Table 3: Filtering Levels for Logging Mobility Router Events

Severity Level Description

debug

Provides low-level debugging messages. Generally this

logs only developer-targeted messages that contain

more detailed information about the internal state of the

system. Debug messages can be used for debugging

problems where the INFO-level logs do not provide

enough information.

Changing the logging level to debug can adversely

affect Mobility Router performance.

info

Events that are expected to happen. These events are

used to trace data flow and process activity.

notice Indicates notification of a normal, expected event.

warning

Warning of a potential or mild error. Indicates that an

unusual condition has been detected that might be

cause for concern. Action should be taken to further

diagnose (if necessary) and correct the problem.

err

Indicates a minor error that might require operator

intervention if it recurs. Investigation and corrective

action should be taken in order to prevent a more

serious (for example, service-affecting) fault.

crit

Indicates that a service-affecting condition has

developed and an urgent corrective action is required.

Such a severity can be reported, for example, when

there is a severe degradation in the capability of the

managed object and its full capability must be restored.

alert

Indicates a severe error condition that requires

operator intervention. Critical parts of the system are

operational. However, either a less critical part of the

system is nonfunctional or the overall system is

operating at a degraded capacity.

emerg

Indicates a service-affecting error condition that

requires immediate attention. A critical part of the

system is either not functioning correctly or has failed.

fatal

Internal server error from which the server cannot

recover and will terminate.