Specifications

Configuring System Settings Setting the System Date and Time
3
ShoreTel Mobility Router Administration Guide 13
Setting the System Date and Time
You can manually set the system date and time for the Mobility Router or configure it to use a Network
Time Protocol (NTP) server to automatically set the system date and time. The system date and time
are used to time stamp log messages, certificate time generation, licensing, and call detail records
(CDRs).
Manually Setting the System Date and Time
NTP Servers must be disabled for manual settings to take effect. Refer to “Configuring NTP” on
page 14 for configuration information.
Figure 12: Setting Date and Time
1. Select Configuration > System > Date and Time > Manual.
2. In the Time Zone list, select the time zone in which the Mobility Router is located.
3. Select Apply.
4. In the Date field, type the current date in the format YYYY/MM/DD, where YYYY indicates the
year, MM indicates the month, and DD indicates the day.
5. In the Time field, type the current time in the format HH:MM:SS, where HH indicates the hour, MM
indicates the minutes, and SS indicates the seconds. Specify the time using 24-hour clock format.
6. Select Apply and continue to the NTP Configuration page to disable NTP servers. Refer to
“Configuring NTP” on page 14 for information.