Specifications

Maintaining the System Changing the Mobility Router Image Used at the Next Reboot
17
ShoreTel Mobility Router Administration Guide 256
Changing the Mobility Router Image Used at the Next Reboot
After installing a Mobility Router image, you can specify that it be used at the next reboot:
1. Select Maintenance > System > Images > Mobility Router. The Mobility Router Images page
displays.
2. In the list of installed Mobility Router images, select the image to be used at the next Mobility
Router reboot.
3. Click Set Next Boot. The next time the Mobility Router is rebooted, the image selected becomes
the active image.
4. To reboot the Mobility Router, click Reboot. You are logged out, and the Mobility Router is
restarted.
5. After the Mobility Router is restarted, log in. The system software image for the Mobility Router is
updated.
Managing Client Images
By default, the Mobility Router is shipped with images of the ShoreTel Mobility Client and Calibrate
applications for each supported mobile device platform.
The Mobility Router can store two images of each client application for each mobile device platform,
including the factory-default image.