Specifications

Managing Redundancy Clusters Initially Configuring the New Mobility Router

ShoreTel Mobility Router Administration Guide 238

Initially Configuring the New Mobility Router

After configuring the first Mobility Router of the redundancy cluster, configure the Mobility Router and

establish it in your network using the Initial Configuration Wizard. For more information, see “Initially

Configuring and Establishing Network Connectivity” on page 232.

Establishing Network Connectivity

Before you can create a redundancy cluster, you must initially configure the second Mobility Router

with the Initial Configuration Wizard, and verify that the Mobility Router has network connectivity. For

information about initially configuring the Mobility Router, see the ShoreTel Mobility Router Hardware

Installation Guide.

Reconfiguring the Previously Configured Mobility Router

Perform the following tasks to reconfigure the previously configured Mobility Router in preparation of

creating a redundancy cluster:

1. Disable all existing users on the Mobility Router. For more information, see “Disabling All Existing

Users” on page 234.

2. Change the eth0 IP address and hostname for the Mobility Router. If you are using Secure

Remote Voice and secure enterprise services, you also need to change the eth1 IP address. For

more information, see “Changing the Hostname and IP Address of the Mobility Router” on

page 234.

3. Import the Mobility Router virtual certificate as described in “Importing the Existing Mobility Router

Certificate as the Virtual Certificate” on page 235.

4. Configure redundancy cluster settings and enable the cluster:

 Specify the original hostname of the Mobility Router as the redundancy cluster name.

 Specify the original Mobility Router IP address as the virtual IP address.

 When prompted, restart the Mobility Router.

For more information, see “Configuring Redundancy Cluster Settings” on page 231.

5. Enable all the existing users. For more information, see “Enabling Existing Users” on page 235.

Disabling All Existing Users

To preserve the existing user configurations after creating the redundancy cluster, you must disable all

the existing users on the Mobility Router:

1. Select Configuration > Groups and Users > Users. The Users page displays.

2. Select all users.

3. Click Disable. All the users are disabled.