Specifications

Managing Unified Communications (Presence) Modifying Presence

ShoreTel Mobility Router Administration Guide 224

 For multi-party instant messaging, enter the conference service Jabber ID configured on the

XMPP server in the Conference Service JID field. Multi-party instant messages are not

supported if this field is left blank.

6. Enter the Name of your UC server.

7. Select an Interface. By default, the IP address associated with the primary interface is chosen.

This interface is used by the Mobility Router for communicating with the UC server.

8. Enter a fully qualified domain name (FQDN) or IP address of the UC server in Host Name field, or

select Copy from PBX and use the name of the UC server already completed in Configuration >

Voice > IP-PBXs. Copy from PBX is only available with ShoreTel IP-PBXs.

9. Enter the Port number. The default port for OCS/Lync is 443. The default port number for XMPP is

5222.

10. In the Domain Name field, enter a qualified domain name, for example “shoretel.com”.

11. Check Subscriber Notification to notify the receiver that a Buddy request has been made. The

default is disabled (unchecked).

12. Check Enabled to enable this server.

13. To perform a test verification of the configuration settings, click the Verify link to attempt to register

to the server with any one of the users. The Server Config Verification window displays:

a. Enter the Presence ID. The entry must match a user’s presence ID on the Mobility Router on

the corporate LDAP server. For a non-Active Directory user, the define the Presence ID on the

OCS or XMPP Server.

b. Enter the user’s Password. The entry must match the password on the Mobility Router on the

corporate LDAP server. For a non-Active Directory user, the define the Presence password on

the OCS or XMPP Server

c. Click Verify to check the status. The status displays in this window.

14. Click Apply to commit all changes.

Modifying Presence

To modify the Presence state:

1. Select Configuration > UC > Server. The Server page displays.

Note

This option is only configurable when used in conjunction with ShoreTel Connect.

Note

Openfire XMPP is supported on Nokia devices only.