Specifications

Managing Users Modifying Users
14
ShoreTel Mobility Router Administration Guide 218
Provisioning
In the Provisioning area, check the Prevent users from changing devices by re-provisioning box to
disallow users from provisioning with their credentials on another phone. The default is read from the
selection in the Groups area. In association with this feature, if the maximum number of devices per
user has been reached, use Configuration > Users > (select Modify)> Devices tab to specify a
device to delete. This allows the new device to be provisioned. For more information on deleting a
device, refer to “Configuring Additional Devices” on page 201.
Applying Changes
Click Apply to save your changes.
Modifying Users
To modify a user:
1. Select Configuration > Groups and Users > User. The User page displays.
2. Select the user to be modified
3. Click Modify. The Modify User page displays.
4. Make any necessary changes. Click Apply on each tab to save the changes.
Enabling and Disabling Multiple Users
When creating or modifying a user, you can enable or disable the user. After you have created users
(or they have been created by user provisioning), you can enable or disable multiple users without
modifying each user individually.
To enable multiple users:
1. Select Configuration > Groups and Users > User. The User page displays.
2. Select the users that you want to enable.
3. Click Enable. The users that you selected are now enabled.
To disable multiple users:
WARNING!
If you make changes to a user configuration, the user must restart the ShoreTel Mobility Client
application before their service can continue. Any configuration change made to the user parameters
affects calls being routed to the ShoreTel Mobility Client and the Client’s handover behavior. If you
change any user settings, the user must exit and restart the ShoreTel Mobility Client application to
register to the Mobility Router again.