Specifications

Managing Users Configuring User Options
14
ShoreTel Mobility Router Administration Guide 216
 International numbers—Select to route outgoing international numbers through the
enterprise. Clear this option to have international calls go directly over the cellular network. By
default, this option is selected.
Enterprise Cellular Call Indicator
To specify an Enterprise Cellular Call Indicator, select one of the following:
 None—If you select this option, the ShoreTel Mobility Client cannot distinguish whether calls
received while a mobile device is on the cellular network are enterprise calls or direct calls.
 Prepend Digits to Caller ID —Select this option to prepend a numeric prefix to the phone number
that the Mobility Router sends to the ShoreTel Mobility Client for enterprise calls while the mobile
device is on the cellular network.
If you selected a numbering plan template other than North America in “Configuring IP-PBX
General Settings” on page 119, the Use Prefix option is automatically selected.
The prefix can be a number up to five digits long.
 Map Used to Unused Area Codes (North America Only) —Select this option to have the
Mobility Router automatically map the phone number for enterprise calls sent to the ShoreTel
Mobility Client when the mobile device is on the cellular network. This is the default option if you
selected North America as the numbering plan template in “Configuring IP-PBX General Settings”
on page 119.
 Use Numbering Plan “Enterprise Full Number Pattern” Table — Select this option to define the
call. When enabled, the ShoreTel Mobility Router downloads the table of enterprise anchored
number patterns to the clients, so that the ShoreTel Mobility Client can detect if a received call is
anchored to the enterprise or is a personal/direct call. If using this option, the numbers used in
Cellular Caller ID Mapping and Enterprise Full Number Pattern must match (Configuration > Voice
> IP-PBX > Numbering Plan > Advanced page - refer to “Cellular Caller ID Mapping” on page 140
and “Enterprise Full Number Pattern” on page 141for configuration information).
Personal Call Routing
ShoreTel supports the Dual Persona
TM
feature, which allows personal calls to be placed directly over
the cellular network, rather than through the enterprise. When a user places a personal-mode call, the
caller ID for your mobile device is the phone number associated with the SIM card rather than the
enterprise phone number. For information about personal-mode calls, see the ShoreTel Mobility User’s
Guide.
1. In the Personal Call Routing area, select the Allow outbound calls directly over cellular check
box to allow personal call routing from users’ mobile devices.
2. If Allow outbound calls directly over cellular is selected, check While roaming route calls to
personal contacts over Wi-Fi if available to route the calls over Wi-Fi.