Specifications
Managing Users Managing Home Locations
14
ShoreTel Mobility Router Administration Guide 208
10. Click Apply to save your changes.
11. The applicable codecs display in the table. Use the Up or Down buttons to select the highest
priority codec supported by both ends. Move the codecs into their appropriately ranked order for
usage, the top codec being the highest priority. To modify the packet duration of a codec:
a. Select the codec from the table.
b. Click Modify.
c. Modify the packet duration.
d. Click Apply to save changes and return to the main screen.
12. A cellular home location may be added or deleted. To add a cellular home location, refer to
“Adding Cellular Information to a Home Location” on page 209.
13. A Wi-Fi home location may be added or deleted. To add a cellular home location, refer to “Adding
Wi-Fi Information to a Home Location” on page 210.
Modifying Home Location General Settings
A home location’s general settings determine when handovers between Wi-Fi and cellular networks
occur. General settings include the following values:
Min Wi-Fi to Cellular Roam RSSI—Minimum Wi-Fi received signal strength indication (RSSI)
threshold below which a call is handed over from Wi-Fi to cellular.
Min Cellular to Wi-Fi Roam RSSI—Minimum Wi-Fi RSSI threshold that must be available for a call
to be handed over from cellular to Wi-Fi.
Min Voice RSSI—Minimum RSSI threshold for incoming and outgoing voice calls.
Max Packet Loss %—Maximum average percentage of voice packet loss allowed before the call is
handed over to the cellular network.
To modify home location general settings:
1. Select Configuration > Groups and Users > Users.
2. Click the Home Locations tab.
3. In the Name area, select the home location whose general settings you want to modify.
4. In the General area, you can modify the following values:
Min Wi-Fi to Cellular Roam RSSI—Minimum Wi-Fi received signal strength indication (RSSI)
threshold below which a call is handed over from Wi-Fi to cellular. The valid value range is -95
through -40, and the default value is -76.
Note
The general settings for a home location are predefined when you create a home location.