Specifications
Managing Users Configuring Devices
14
ShoreTel Mobility Router Administration Guide 198
Configuring the Mobility Client
1. Select Configuration > Groups and Users > Users > Devices tab.
2. Select the maximum number of devices allowed for this user. The maximum is 5. The default is 1.
3. Select Apply.
4. Click Add to add a new device. The Add New Device page displays.
5. Select the Device Type of Mobility Client.
6. Optionally, enter a Device Name. If not specified, the Mobility Router generates a generic device
name.
7. Select Next.
8. In the Cellular Number field, type the user’s cellular telephone number.
9. In the Cellular Operator list, select the cellular provider for the mobile device, or select Add or
Manage to modify these settings. Refer to “Managing Cellular Operators” on page 159
Tip
Adding a new user device is optional. Devices are automatically added once the user completes the
provisioning of a new device through Mobility Client.
Note
An incoming call to the user will be forked simultaneously to all the user’s devices, based on each
device's current call routing capability (Wi-Fi, cellular data or cellular voice). Similarly, outgoing calls
may be placed at the same time from all the devices, but the maximum allowed simultaneous outgoing
calls per user is limited to two from the ShoreTel Mobility Router and the PBX's configurations.
Note
If modifying an existing device’s configuration, double-click the device in the User Devices table, or
select the device then click Modify, then follow these instructions to add a device. Similarly, to delete
a device, select Delete and follow the prompts.