Specifications

Managing Groups Configuring Device Options
13
ShoreTel Mobility Router Administration Guide 187
Configuring Device Options
Select the Configuration > Groups and Users > Groups > Device Options tab to configure the
following device options:
 “Maximum Number of Devices” on page 187
 “DTMF Error Correction” on page 187
 “Caller ID via DTMF” on page 187
 “Cellular Call Answer Confirmation” on page 188
 “Applying Changes” on page 188
Maximum Number of Devices
Select the maximum number of devices per user. The maximum is 5. The default is 1. The Maximum
Number of Devices per user setting in the Users page takes precedence over this setting. Refer to
“Configuring the Mobility Client” on page 198 for more information.
DTMF Error Correction
Enable DTMF Forward Error Correction to improve reliability of DTMF digit delivery on calls placed
on the cellular network. The default is Disabled. Note that when changing the operational functionality
between Enabled and Disabled, the client may take some time to sync with the change.
Caller ID via DTMF
Enable Caller ID via DTMF is to view options Always, Never or only when Roaming. Some cellular
operators block Caller ID for cellular calls.
 The default for this option is Roaming, where the client uses DTMF for presenting its caller ID
when in a roaming network.
 Select Always when the cellular operator in this area is known to block Caller ID.
 Select Never when the cellular operator in this area does not block Caller ID.