Specifications

Managing Groups Configuring User Options

ShoreTel Mobility Router Administration Guide 186

data; calls may be misdirected to the wrong emergency response center or the emergency

response center may make errors when determining your location. ShoreTel is not liable for

any resulting error or delay.

For more information on configuring emergency number patterns, refer to “Emergency Number

Pattern” on page 141.

Call Ignore

Select Ignore call on all shared line devices to ensure the mobile device and all other devices that

share the same line immediately stop ringing when a user selects to ignore an incoming call on the

mobile device. If this option is not selected and the user chooses to ignore an incoming call on the

mobile device, the other devices sharing the same line continue to ring until the maximum ring time

configured on the PBX is reached. If none of the other devices answers the call within the maximum

ring time, the call is then forwarded to voice mail.

Client Privilege

Assign a Client Privilege to this device. Selecting Restricted removes Preferences from the device

menu. In addition, when in Restricted mode, you can not exit from the Client. Select Full to show all

menus and enable exiting.

Provisioning

Select Prevent users from changing devices by re-provisioning to disallow users in this group

from provisioning with their credentials on another phone. The default is unchecked (disabled).

Applying Changes

Click Apply to save your changes,. To apply these security settings to all existing users in the group,

first select Apply to all existing users in this group and then click Apply.

Note

Call Ignore is available on VoIP calls only.

Note

Configure voice mail on the IP-PBX for this option to be effective. If voice mail is not configured on the

IP-PBX, the call is not sent to voice mail.

Note

Restricted mode applies to Nokia devices only.

WARNING!

If Apply to all existing users in this group is not checked before Apply is clicked, the selected

options will not apply to the existing users in the group, but will apply to any new users added to this

group.