Manualshelf

Specifications

ManualsBrandsShoreTel ManualsComputer equipmentMobility Router 4000
191192193194195196197198199200
Managing Groups Configuring User Options
13
ShoreTel Mobility Router Administration Guide 182
Call Routing
To configure Call Routing:
1. Select Wi-Fi to allow users in this group to access voice services over Wi-Fi. Click the Remote
Access link to go to the Remote Access page to configure Remote settings including protocols,
client IP pool information and options. Refer to “Managing Remote Access” on page 40 for details.
2. Select Cellular Data to allow users in this group to access voice services from cellular packet-data
networks.
3. Select Cellular Voice to allow users in this group to access voice services from cellular networks.
4. Select Cellular Data Roaming—Select to allow access to voice services from cellular packet-data
networks when the mobile device is roaming.
5. Select Cellular Voice Roaming—Select to allow access to voice services from the cellular
network when the mobile device is roaming.
Data Services
In the Data Services area, specify whether users in the group can access secure enterprise services
from cellular packet-data networks and remote Wi-Fi networks.
1. Cellular Data —Select to allow users in this group to access secure enterprise services from
cellular packet-data networks.
2. Cellular Data Roaming—Select to allow access to data services from cellular data networks
when the mobile device is roaming.
By default, these options are not enabled. You can enable one or both of these options.
Note
Some mobile devices, such as Apple iOS devices, cannot detect when the device is roaming.
Enabling/Disabling Cellular Data Roaming and Cellular Voice Roaming will not be recognized by these
devices. Instead, the administrator may need to set those users into a special Group with the desired
settings for those devices.
Note
Some mobile devices, such as Apple iOS devices, cannot detect when the device is roaming.
Enabling/Disabling Cellular Data Roaming will not be recognized by these devices. Instead, the
administrator may need to set those users into a special Group with the desired settings for those
devices.