Specifications

Configuring Voice Settings Managing Cellular Operators
11
ShoreTel Mobility Router Administration Guide 162
is 15000.
 In the Forward Dial Request Abort Timer field, enter the maximum time the Mobility Router
waits, after receiving a reverse dial request call, before initiating the reverse dial call. If it does not
get the cell call in this time, the Notify message received is ignored.
 In the DTMF Inter Digit Timeout field, enter the duration the Mobility Router waits after each
DTMF digit it receives before it assumes that all the digits have been received.
On the Client tab:
 In the Access Call DTMF Timer field, enter the time the ShoreTel Mobility Client waits to transmit
DTMF after the cell call it originated is fully established. Enter a value in the range between 100
and 60000 ms. The default is 800.
 In the Answer Call DTMF Timer field, enter the time that the ShoreTel Mobility Client waits to
transmit a DTMF confirmation digit (#) after it answers a cellular call. Enter a value in the range
between 0 and 6000 ms. The default is 200.
 In the Handout Connect Timer field, enter the maximum time a ShoreTel Mobility Client tries to
complete a cellular call for handover from VoIP. Enter a value in the range between 100 and 60000
ms. The default is 15000.
 In the Handin Connect Timer field, enter the maximum time a ShoreTel Mobility Client tries to
complete a VoIP call for handover from cellular. Enter a value in the range between 100 and 60000
ms. The default is 5000.
 In the Handout Disconnect Timer field, enter the maximum time a ShoreTel Mobility Client keeps
the VoIP call leg up after successful handover to Cellular. Enter a value in the range between 100
and 60000 ms. The default is 1000.
 In the Handin Disconnect Timer field, enter the maximum time a ShoreTel Mobility Client keeps
the Cellular call leg up after successful handover to VoIP. Enter a value in the range between 0 and
6000 ms. The default is 200.
 In the Mobile to Fixed Reverse Notify Call Disconnect Timer field, enter the maximum time a
ShoreTel Mobility Client allows the reverse dial notify call to proceed before disconnecting it. The
client must give sufficient time to ensure that the call has reached the Mobility Router. Enter a
value in the range between 100 and 60000 ms. The default is 6000.
 In the Mobile to Fixed Reverse Dial Abort Timer field, after delivering the reverse dial request to
the Mobility Router, enter maximum time a ShoreTel Mobility Client waits for the reverse dial call
from the Mobility Router. If the call is not received within this time, it is assumed that the reverse
dial call failed and the client falls back into normal dial mode. Enter a value in the range between
100 and 60000 ms. The default is 10000.
 In the Forward Dial Request Abort Timer field, enter the maximum time a ShoreTel Mobility
Client waits for the response from the Mobility Router for its Forward Dial Notify Request. If the
client does not get the response during this time, it will send the remote party digits in DTMF
format.
 In the SIP Initial Retransmit Timer field, enter the duration the ShoreTel Mobility Client waits for
the SIP initial retransmit time over cellular data.