Specifications

Managing IP-PBX Integration Configuring Numbering Plan Settings
10
ShoreTel Mobility Router Administration Guide 143
Modifying Numbering Plan Table Patterns
For any of the numbering plan tables, you can modify patterns to accommodate your requirements.
To modify a numbering plan table pattern:
1. Select Configuration > Voice > IP-PBXs.
2. Click the Modify button for the numbering plan tables. The Modify Table Entry page displays.
The fields available depend on the numbering plan table that you selected. For more information,
see Overview of Numbering Plan Table Patterns on page 132.
3. To save your changes, click Apply.
Deleting Numbering Plan Table Patterns
To delete a numbering plan table pattern:
1. Select Configuration > Voice > IP-PBXs.
2. Click the Numbering Plan tab.
3. Select Advanced.
4. In the Table list, select the numbering plan table pattern that you want to delete.
5. When prompted to delete the table entries, click OK.
Using the Test Panel
You can test new or existing numbering plan pattern tables with the test panel to see which pattern a
phone extension or number matches. After creating or modifying a pattern for a numbering plan table,
you can verify that the pattern works correctly by providing an input number, which gets matched
against the list of patterns to map to the output number that the Mobility Router uses.
When an extension or phone number is compared to numbering plan table patterns, the pattern that
best matches the number is used. In the test panel, the patterns that best match the input number are
assigned weights. The pattern with the highest weight is the best match that is used to map the input
number. If there are two patterns that match with the same weight, the first pattern in the pattern list is
used.
Note
When on the Show Value page, Numbering Plan Table Patterns can not be modified.