Specifications

Managing IP-PBX Integration Configuring Numbering Plan Settings

ShoreTel Mobility Router Administration Guide 142

Adding Numbering Plan Table Patterns

For any of the numbering plan tables, you can add new patterns to accommodate your requirements.

Adding an extremely large number of new patterns (more than 1,000) might slow Mobility Router

performance. To test new numbering plan table patterns, you can use the test panel to verify patterns.

For more information, see Using the Test Panel on page 143.

To add a numbering plan table pattern:

1. Select Configuration > Voice > IP-PBXs.

2. Select the IP-PBX to which you want to apply a numbering plan template, and click Modify.

3. Click the Numbering Plan tab, and select Advanced.

4. In the Table list, select the numbering plan table to which you want to add a pattern.

5. Click the Add button for the numbering plan tables. The Add Table Entry page displays.

6. Fill in the fields for the Add Table Entry page. The fields available depend on the numbering plan

table that you selected. For more information, see Overview of Numbering Plan Table Patterns on

page 132.

7. To save your changes, click Apply.

Changing the Order of Patterns for a Numbering Plan Table

When an extension or phone number is compared to numbering plan table patterns, the pattern that

best matches the number is used. If there are two patterns that match with the same weight, the first

pattern in the pattern list is used. You can move patterns up and down in the pattern list for a

numbering plan table.

To move a pattern up or down in the pattern list:

1. Select Configuration > Voice > IP-PBXs.

2. Click the Numbering Plan tab.

3. Select Advanced.

4. In the Table list, select the numbering plan table pattern that you want to move.

5. Do one of the following:

 To move the pattern up in the list, click Up.

 To move the pattern down in the list, click Down.