Specifications

Managing IP-PBX Integration Configuring Numbering Plan Settings
10
ShoreTel Mobility Router Administration Guide 141
 Original Called Number — the pattern for the phone number originally dialed.
 Converted Called Number — the pattern for the mapped phone number that is used to place
the call.
Emergency Number Pattern
Patterns in this table identify emergency numbers (for example, 911). By default, country-specific main
emergency number patterns are automatically added to this table. Add additional patterns or modify
existing pattern to accurately identify all emergency numbers in your country. Phone numbers covered
by patterns in this table are dialed directly over cellular network when there is cellular coverage.
Depending on the configuration of Emergency Call Routing in Configuration > Groups and Users >
Groups > Options, emergency numbers might optionally be routed over Wi-Fi network. See
Emergency Call Routing on page 185 for more information. It is the responsibility of the Administrator
of the system to ensure the proper emergency number(s) configuration in this table to ensure calls are
routed to the correct destination. ShoreTel, Inc. is not liable for any resulting error or delay due to
misconfiguration of this table.
 Pattern — the pattern for special service numbers.
Cellular Direct Number Pattern
Patterns in this table specify numbers to be routed directly over cellular network and should include
cellular networks special service numbers such as 411 and 511. Add other patterns that are to be
routed directly over the cellular networks.
 Pattern — the pattern for special service numbers.
Enterprise Extension Pattern
The Dynamic Anchoring feature on the Mobility Router provides a mechanism to only route calls
through the enterprise if an enterprise extension is dialed. If configuring outgoing calls to enterprise
extensions while on the cellular network, the ShoreTel Mobility Client must know whether an outgoing
call placed by a user is an enterprise extension.
 Pattern — the pattern for enterprise extension.
Enterprise Full Number Pattern
The Enterprise Full Number Pattern Table is used if the selection for Enterprise Cellular Call Indicator
for the PBX is “Use Numbering Plan Enterprise Full Number Pattern Table”. This table should cover all
the phone numbers your enterprise is allowed to send as caller ID on outgoing PSTN calls.
 Pattern — the pattern for full enterprise number. You can add multiple entries to the table.
Note
The parameters *(LAC)(LEC)(EEP) are listed in this table by default, and cover most of your
enterprise numbers. Add these parameters to the table if they are not displayed (this may be the case
if you have upgraded your ShoreTel Mobility Router from version 3.1 or older).