Specifications

Managing IP-PBX Integration Configuring Numbering Plan Settings
10
ShoreTel Mobility Router Administration Guide 135
Showing Values and Keys of Numbering Plan Parameters
By default, if numbering plan parameter keys are used in patterns, the keys are shown in the patterns.
For example, the default pattern for the Enterprise Extension Pattern table, which has a default value
of 8XXX. To see the value of the (EEP) key in the pattern, you can use the Show Values/Show Keys
button. The pattern then uses 8XXX in the pattern rather than (EEP).
Figure 65: Key / Value Mapping
To review numbering plan table patterns as values:
1. Select Configuration > Voice > IP-PBXs.
2. Click the Numbering Plan tab.
3. Select Advanced.
4. In the Table list, select the numbering plan table pattern that you want to review.
5. Click Show Values. The values of the patterns are listed.
6. To switch back to reviewing patterns as parameter keys, click Show Keys.