Specifications

Managing IP-PBX Integration Configuring Numbering Plan Settings
10
ShoreTel Mobility Router Administration Guide 123
On the ShoreTel Mobility Router, the Numbering Plan tab for an IP-PBX consists of two pages: Basic
and Advanced.
Figure 52: Basic—Defines default numbering plan parameters that are applied to the IP-PBX numbering plan.
You can apply one of the predefined numbering plans to the IP-PBX to start over with a set of default
numbering plan values. If the country in which the Mobility Router changes, you can apply a template
for the new country to the IP-PBX. After you apply a numbering plan template to an IP-PBX, any
changes that you made to the previous numbering plan are lost, and the numbering plan uses the
default settings from the template until you modify the numbering plan. Use this mode to add or modify
the following:
 Anonymous Caller ID (ACI)—Phone number the Mobility Router uses as the caller ID when it
forwards an anonymous call to the mobile device when it is on the cellular network. The
anonymous caller ID must be a valid PSTN number and match the route pattern of the SIP trunk
configured on the IP-PBX. This ensures that the ShoreTel Mobility Client can receive this caller ID
when the mobile device is on the cellular network. The anonymous caller ID can include digits and
plus signs (+). For example, if you specify [phone] as the anonymous caller ID parameter,
the Mobility Router sends the number as the caller ID of the call. The ShoreTel Mobility Client
interprets the number as the anonymous number and displays “unnamed” on the mobile device.
 International Access Code (IAC)—The number that is prepended to phone numbers when end
users place calls to phone numbers outside of the country in which the Mobility Router is located.
A default value for the IAC is applied to a numbering plan when it is first added. Verify that the IAC
value is correct for the country in which the Mobility Router is located. Modify the IAC value if
necessary. The default value depends on the numbering plan template that you chose when you
added the IP-PBX. For example, the default value for the North America template is 011, and the
default value for the United Kingdom template is 00.