Specifications

Managing IP-PBX Integration Configuring IP-PBX General Settings
10
ShoreTel Mobility Router Administration Guide 120
b. In the Port field, type the port number of the SIP listening port on the IP-PBX that the Mobility
Router uses for access. The port number can be between 1024 through 49151, and the
default value is 5060.
c. In the SIP Transport list, select the protocol used for SIP transport:
 udp
 tcp
d. In the SIP Domain Name field, enter a domain name of the appropriate/logical group for this
PBX, for example marketing.shoretel.com. Note that some PBXs do not use this field. Refer to
your PBX Configuration Guide for more information.
e. In the Keep Alive Time field, type the interval at which the Mobility Router sends registration
keepalive messages to the PBX. Do one of the following:
11. Click Enable to enable ShoreTel Communicator features including Visual Voice Mail,
Extension Assignment, and Call Handling mode. This feature is supported on ShoreTel IP-
PBXs versions 12.3, 13.1 and 14+.
 Select an Interface. By default, the IP address associated with the primary interface is
chosen. This interface is used by the Mobility Router for communicating with the ShoreTel IP-
PBX.
 Enter the Server Address. This is the Shoreware Director address.
 Enter the Server Port. The default is 80. This is the ShoreTel Shoreware Director port.
 Enter the CAS Port. The default is 5447. This is the
 Enter the default Domain Name. This is only required if the users are using LDAP to
authenticate. Leave this field blank if LDAP is not being used for AD authentication.
 Select Add ShoreTel UC Server to add a “ShoreTel” IM server. The link jumps to a page with
pre-populated fields from this information.
 Select Add ShoreTel Directory Server to add a “ShoreTel” directory server. The link jumps to
a page with pre-populated fields from this information.
12. Click Next to configure SIP Trunk parameters.
Note
This option is only configurable when used in conjunction with ShoreTel Connect.