Specifications

Managing IP-PBX Integration Adding an IP-PBX
10
ShoreTel Mobility Router Administration Guide 119
Adding an IP-PBX
Add an IP-PBX on the Mobility Router for each enterprise IP-PBX with which the Mobility Router
communicates.
Configuring IP-PBX General Settings
To configure IP-PBX general settings:
5. Select Configuration > Voice > IP-PBXs.
6. Click Add to view the General page.
Figure 50: IP-PBX General Parameters
7. In the Name field, type the name for the IP-PBX. The name can be up to 50 alphanumeric
characters long and cannot contain special characters except for spaces, hyphens (-), and
underscores (_).
8. In the Type list, select the IP-PBX type from the list of supported PBXs.
9. In the Numbering Plan Template list, select the numbering plan template that you want to use
with the IP-PBX.
The Mobility Router has a set of predefined numbering plan templates for different countries. Select
the template for the country in which the Mobility Router is located. If that country is not listed, select
the template of a country that has similar numbering plan characteristics. You can then modify the
numbering plan, as described in Configuring Numbering Plan Settings on page 122.
10. To enable the use of registration on the IP-PBX, select the Line-Side Support check box. By
default, this option is selected. To disable line-side support, clear the Line-Side Support check
box. Disable this option only if the IP-PBX does not support Line Side Interface. If you disable this
option, go to Step Configuring SIP Trunk Settings on page 121.
a. In the FQDN or IP Address field, type the fully qualified domain name (FQDN) or IP address
of the IP-PBX.