Specifications

Managing Mobility Integrating WLAN Controllers with the Mobility Router
9
ShoreTel Mobility Router Administration Guide 117
 For Cisco controllers, the TX Power Update trap must also be enabled.
9. To enable synchronization of enterprise location information from the WLAN controller with the
Mobility Router, select the Synchronize Enterprise Locations check box. By default, this option is
not selected. To disable this option, clear the Synchronize Enterprise Locations check box.
10. Click Apply to save your changes.
Deleting WLAN Controllers
To delete a WLAN controller:
1. Select Configuration > Mobility > WLAN Controllers. The WLAN Controllers page displays.
2. Select the WLAN controller(s) that you want to delete.
3. Click Delete.
4. When prompted to confirm the deletion, select OK. The WLAN controller is deleted
Tip
If you have the previous items configured on the WLAN controller, you do not need to retake
calibrations for previous calibrations, even if TX power values have been manually or automatically
changed.
Note
This option is valid only if enterprise location information is configured for the WLAN controller.